Features:

  • Cleans and brightens
  • Vigorous foaming action
  • Non-acid formula

Benefits:

  • Leaves the coil clean and bright equal to or better than traditional acid formulations
    Rapidly penetrates and loosens soil. Expanding foam extends contact time and lifts soil located deep within the coil. Foam and dirt are easily rinsed with water
    Does not contain hazardous hydrofluoric acid. The product is non fuming and is non corrosive to ferrous metals.

Application:

  • Pro-Red Plus™ is a complete, non-acid foaming cleaner and brightener for condenser coils. Pro-Red Plus™ will loosen even the most stubborn soils and allow them to easily rinse away. This highly alkaline solution makes cleaning condenser coils fast and easy.

MIX RATIO:

  • 1:3 Maximum Foaming and Soil Lifting : Mix 1 part Pro-Red Plus™ with 3 parts water
    1:10 Moderately Dirty or Greasy: Mix 1 part Pro-Red Plus™ with 10 parts water.

Directions:

  1. For outdoor use only. Wear protective goggles and gloves. Avoid breathing spray mist or vapors
  2. Apply with a chemical resistant sprayer adjusted for coarse spray to minimize misting
  3. Mix one part Pro-Red Plus™ with three parts water to achieve maximum foaming and soil lifting action. For moderately dirty or greasy condenser coils, Pro-Red Plus™ is effective when mixed with up to ten parts water
  4. Shut system off, then spray the Pro-Red Plus™ solution into the coil fins from the bottom up
  5. Allow three to five minutes to achieve maximum foaming and cleaning, then thoroughly flush the coil with clean water. After use, thoroughly rinse sprayer with clean water
  6. Return the system to service.